๐Ÿ“š Bundle Version History

com.autodesk.AutoCAD2025

v25.0.58.214 Copyright ยฉ 2009-2024 Autodesk, Inc
โœ… Yes, Native Apple Silicon Support
๐Ÿ–ฅ Supported Architectures X86, ARM
Full Info Plist
{
  "ATSApplicationFontsPath": "Fonts/ttf",
  "BuildMachineOSBuild": "22E252",
  "CFBundleDevelopmentRegion": "en",
  "CFBundleDisplayName": "AutoCAD",
  "CFBundleDocumentTypes": [
    {
      "CFBundleTypeExtensions": [
        "dst"
      ],
      "CFBundleTypeIconFile": "dst.icns",
      "CFBundleTypeName": "AutoCAD Project",
      "CFBundleTypeOSTypes": [
        "dst"
      ],
      "CFBundleTypeRole": "Editor",
      "NSDocumentClass": "AcDocument"
    },
    {
      "CFBundleTypeExtensions": [
        "dxf"
      ],
      "CFBundleTypeIconFile": "dxf.icns",
      "CFBundleTypeName": "AutoCAD DXF",
      "CFBundleTypeOSTypes": [
        "dxf"
      ],
      "CFBundleTypeRole": "Editor",
      "NSDocumentClass": "AcDocument"
    },
    {
      "CFBundleTypeExtensions": [
        "dwg"
      ],
      "CFBundleTypeIconFile": "dwg.icns",
      "CFBundleTypeName": "AutoCAD DWG",
      "CFBundleTypeOSTypes": [
        "dwg"
      ],
      "CFBundleTypeRole": "Editor",
      "NSDocumentClass": "AcDocument"
    },
    {
      "CFBundleTypeExtensions": [
        "dwt"
      ],
      "CFBundleTypeIconFile": "dwt.icns",
      "CFBundleTypeName": "AutoCAD Template",
      "CFBundleTypeOSTypes": [
        "dwt"
      ],
      "CFBundleTypeRole": "Editor",
      "NSDocumentClass": "AcDocument"
    },
    {
      "CFBundleTypeExtensions": [
        "lsp"
      ],
      "CFBundleTypeIconFile": "lsp.icns",
      "CFBundleTypeName": "AutoLISP Application Extension",
      "CFBundleTypeOSTypes": [
        "lsp"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "lin"
      ],
      "CFBundleTypeIconFile": "lin.icns",
      "CFBundleTypeName": "AutoCAD Linetype Definition",
      "CFBundleTypeOSTypes": [
        "lin"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "pat"
      ],
      "CFBundleTypeIconFile": "pat.icns",
      "CFBundleTypeName": "AutoCAD Hatch Pattern Definition",
      "CFBundleTypeOSTypes": [
        "pat"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "psf"
      ],
      "CFBundleTypeIconFile": "psf.icns",
      "CFBundleTypeName": "AutoCAD PostScript Patterns",
      "CFBundleTypeOSTypes": [
        "psf"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "dct"
      ],
      "CFBundleTypeIconFile": "dct.icns",
      "CFBundleTypeName": "AutoCAD Dictionary",
      "CFBundleTypeOSTypes": [
        "dct"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "shx"
      ],
      "CFBundleTypeIconFile": "shx.icns",
      "CFBundleTypeName": "AutoCAD Compiled Shape",
      "CFBundleTypeOSTypes": [
        "shx"
      ],
      "CFBundleTypeRole": "None",
      "LSHandlerRank": "Default",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "shp"
      ],
      "CFBundleTypeIconFile": "shp.icns",
      "CFBundleTypeName": "AutoCAD Shape Source",
      "CFBundleTypeOSTypes": [
        "shp"
      ],
      "CFBundleTypeRole": "None",
      "LSHandlerRank": "Default",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "unt"
      ],
      "CFBundleTypeIconFile": "unt.icns",
      "CFBundleTypeName": "AutoCAD Unit Definition",
      "CFBundleTypeOSTypes": [
        "unt"
      ],
      "CFBundleTypeRole": "None",
      "LSHandlerRank": "Default",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "pss"
      ],
      "CFBundleTypeIconFile": "pss.icns",
      "CFBundleTypeName": "AutoCAD Plot Stamp Settings",
      "CFBundleTypeOSTypes": [
        "pss"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "dcl"
      ],
      "CFBundleTypeIconFile": "dcl.icns",
      "CFBundleTypeName": "AutoCAD Dialog Definition",
      "CFBundleTypeOSTypes": [
        "dcl"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "fdc"
      ],
      "CFBundleTypeIconFile": "fdc.icns",
      "CFBundleTypeName": "AutoCAD Field Catalog",
      "CFBundleTypeOSTypes": [
        "fdc"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "pgp"
      ],
      "CFBundleTypeIconFile": "pgp.icns",
      "CFBundleTypeName": "AutoCAD Program Parameters",
      "CFBundleTypeOSTypes": [
        "pgp"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "mln"
      ],
      "CFBundleTypeIconFile": "mln.icns",
      "CFBundleTypeName": "AutoCAD Multiline Definition",
      "CFBundleTypeOSTypes": [
        "mln"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "fmp"
      ],
      "CFBundleTypeIconFile": "fmp.icns",
      "CFBundleTypeName": "AutoCAD Font Map",
      "CFBundleTypeOSTypes": [
        "fmp"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "map"
      ],
      "CFBundleTypeIconFile": "map.icns",
      "CFBundleTypeName": "AutoCAD Font Mapping Table",
      "CFBundleTypeOSTypes": [
        "map"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "cdc"
      ],
      "CFBundleTypeIconFile": "cdc.icns",
      "CFBundleTypeName": "DesignCenter Preview Cache File",
      "CFBundleTypeOSTypes": [
        "cdc"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "cuix"
      ],
      "CFBundleTypeIconFile": "cuix.icns",
      "CFBundleTypeName": "AutoCAD customization file",
      "CFBundleTypeOSTypes": [
        "cuix"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "cui"
      ],
      "CFBundleTypeIconFile": "cui.icns",
      "CFBundleTypeName": "AutoCAD customization file",
      "CFBundleTypeOSTypes": [
        "cui"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "arx"
      ],
      "CFBundleTypeIconFile": "arx.icns",
      "CFBundleTypeName": "AutoCAD runtime extension",
      "CFBundleTypeOSTypes": [
        "arx"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "pc3"
      ],
      "CFBundleTypeIconFile": "pc3.icns",
      "CFBundleTypeName": "AutoCAD Plotter Configuration File",
      "CFBundleTypeOSTypes": [
        "pc3"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "dsd"
      ],
      "CFBundleTypeName": "AutoCAD Drawing Set Descriptions",
      "CFBundleTypeOSTypes": [
        "dsd"
      ],
      "CFBundleTypeRole": "None",
      "LSHandlerRank": "Default",
      "NSDocumentClass": "None"
    }
  ],
  "CFBundleExecutable": "AutoCAD",
  "CFBundleIconFile": "acadlogo.icns",
  "CFBundleIdentifier": "com.autodesk.AutoCAD2025",
  "CFBundleInfoDictionaryVersion": "6.0",
  "CFBundleName": "AutoCAD 2025",
  "CFBundlePackageType": "APPL",
  "CFBundleShortVersionString": "25.0.58.214 Copyright ยฉ 2009-2024 Autodesk, Inc",
  "CFBundleSignature": "????",
  "CFBundleSupportedPlatforms": [
    "MacOSX"
  ],
  "CFBundleVersion": "25.0.58.214",
  "DTCompiler": "com.apple.compilers.llvm.clang.1_0",
  "DTPlatformBuild": "",
  "DTPlatformName": "macosx",
  "DTPlatformVersion": "13.3",
  "DTSDKBuild": "22E245",
  "DTSDKName": "macosx13.3",
  "DTXcode": "1430",
  "DTXcodeBuild": "14E222b",
  "LSApplicationCategoryType": "public.app-category.business",
  "LSHasLocalizedDisplayName": true,
  "LSMinimumSystemVersion": "12.0",
  "NSAppTransportSecurity": {
    "NSAllowsArbitraryLoads": true,
    "NSAllowsArbitraryLoadsInWebContent": true
  },
  "NSDesktopFolderUsageDescription": "",
  "NSDocumentsFolderUsageDescription": "AutoCAD for Mac needs to create folders within your Documents folder. The folders are used for autosave, crash save, and more.",
  "NSDownloadsFolderUsageDescription": "",
  "NSHumanReadableCopyright": "Copyright ยฉ 2009-2024 Autodesk, Inc",
  "NSMainNibFile": "MainMenu",
  "NSNetworkVolumesUsageDescription": "",
  "NSPrincipalClass": "AcApplication",
  "NSRemovableVolumesUsageDescription": "",
  "NSRequiresAquaSystemAppearance": true,
  "NSUserActivityTypes": [
    "com.autodesk.AutoCAD.viewing"
  ],
  "NSUserNotificationAlertStyle": "alert",
  "UTExportedTypeDeclarations": [
    {
      "UTTypeConformsTo": "public.data",
      "UTTypeDescription": "AutoCAD Drawing",
      "UTTypeIdentifier": "com.autodesk.autocad.dwg",
      "UTTypeTagSpecification": {
        "com.apple.ostype": [
          "DWG"
        ],
        "public.filename-extension": "dwg",
        "public.mime-type": "application/dwg"
      }
    },
    {
      "UTTypeConformsTo": "public.data",
      "UTTypeDescription": "AutoCAD Drawing Template",
      "UTTypeIdentifier": "com.autodesk.autocad.dwt",
      "UTTypeTagSpecification": {
        "com.apple.ostype": [
          "DWT"
        ],
        "public.filename-extension": "dwt",
        "public.mime-type": "application/dwt"
      }
    },
    {
      "UTTypeConformsTo": [
        "com.apple.package"
      ],
      "UTTypeDescription": "AutoCAD crx file",
      "UTTypeIdentifier": "com.autodesk.autocad.crx",
      "UTTypeTagSpecification": {
        "com.apple.ostype": "CRX",
        "public.filename-extension": "crx",
        "public.mime-type": "application/crx"
      }
    },
    {
      "UTTypeConformsTo": [
        "com.apple.package"
      ],
      "UTTypeDescription": "AutoCAD DBX file",
      "UTTypeIdentifier": "com.autodesk.autocad.dbx",
      "UTTypeTagSpecification": {
        "com.apple.ostype": [
          "DBX"
        ],
        "public.filename-extension": "dbx",
        "public.mime-type": "application/dbx"
      }
    }
  ],
  "company": "autodesk"
}
Full Meta Details
{
  "fileSize": 4.070556640625,
  "architectures": [
    {
      "bits": "32-bit",
      "fileType": "Fixed Virtual Memory Shared Library File",
      "header": {
        "magic": 3405691582,
        "cputype": 0,
        "cpusubtype": 16,
        "filetype": 3,
        "ncmds": 1024,
        "sizeofcmds": 2117040,
        "flags": [
          "The object file is the output of an incremental link against a base file and can not be link edited again.",
          "The object file is the input for the dynamic linker and can not be staticly link edited again.",
          "The object file's undefined references are bound by the dynamic linker when loaded."
        ]
      },
      "loadCommandsInfo": [
        {
          "description": 3405691582,
          "size": 2,
          "offset": " 0x0"
        },
        {
          "description": 4103,
          "size": 3,
          "offset": " 0x8"
        },
        {
          "description": 1024,
          "size": 2117040,
          "offset": " 0x10"
        },
        {
          "description": "Dynamic Linker Load Command",
          "size": 4108,
          "offset": " 0x18"
        },
        {
          "description": 0,
          "size": 134144,
          "offset": " 0x20"
        },
        {
          "description": 132624,
          "size": 14,
          "offset": " 0x28"
        }
      ],
      "magic": "cafebabe",
      "offset": "0",
      "processorSubType": "v7em",
      "processorType": 0
    },
    {
      "bits": "64-bit",
      "fileType": "Demand Paged Executable File",
      "header": {
        "magic": 3489328638,
        "cputype": 7,
        "cpusubtype": 3,
        "filetype": 2,
        "ncmds": 78,
        "sizeofcmds": 8424,
        "flags": [
          "The object file has no undefined references and is executable.",
          "The object file is the input for the dynamic linker and can not be staticly link edited again.",
          "undefined"
        ],
        "reserved": 0
      },
      "loadCommandsInfo": [
        {
          "description": 4277009103,
          "size": 3,
          "offset": " 0x4000"
        },
        {
          "description": "Symbol segment command",
          "size": 78,
          "offset": " 0x4008"
        },
        {
          "description": 78,
          "size": 69304453,
          "offset": " 0x4010"
        },
        {
          "description": 69304453,
          "size": 25,
          "offset": " 0x4018"
        },
        {
          "description": "64-bits Segment Load Command",
          "size": 1095786335,
          "offset": " 0x4020"
        },
        {
          "description": 1095786335,
          "size": 20306,
          "offset": " 0x4028"
        },
        {
          "description": 0,
          "size": 25,
          "offset": " 0x4060"
        },
        {
          "description": "64-bits Segment Load Command",
          "size": 1163157343,
          "offset": " 0x4068"
        },
        {
          "description": 0,
          "size": 62464,
          "offset": " 0x4080"
        },
        {
          "description": 0,
          "size": 62464,
          "offset": " 0x4090"
        },
        {
          "description": 62464,
          "size": 5,
          "offset": " 0x4098"
        },
        {
          "description": "UNIX Thread command",
          "size": 19,
          "offset": " 0x40a0"
        },
        {
          "description": "Sub Umbrella Load Command",
          "size": 1702125407,
          "offset": " 0x40a8"
        },
        {
          "description": 0,
          "size": 1163157343,
          "offset": " 0x40b8"
        },
        {
          "description": 0,
          "size": 75968,
          "offset": " 0x40c8"
        },
        {
          "description": 75968,
          "size": 683428,
          "offset": " 0x40d0"
        },
        {
          "description": 683428,
          "size": 75968,
          "offset": " 0x40d8"
        },
        {
          "description": 0,
          "size": 524352,
          "offset": " 0x40e8"
        },
        {
          "description": 0,
          "size": 1953718111,
          "offset": " 0x40f8"
        },
        {
          "description": 0,
          "size": 1163157343,
          "offset": " 0x4108"
        },
        {
          "description": 0,
          "size": 759396,
          "offset": " 0x4118"
        },
        {
          "description": 759396,
          "size": 8796,
          "offset": " 0x4120"
        },
        {
          "description": 8796,
          "size": 759396,
          "offset": " 0x4128"
        }
      ],
      "magic": "cffaedfe",
      "offset": "4000",
      "processorSubType": 3,
      "processorType": "X86"
    },
    {
      "bits": "64-bit",
      "fileType": "Demand Paged Executable File",
      "header": {
        "magic": 3489328638,
        "cputype": 12,
        "cpusubtype": 0,
        "filetype": 2,
        "ncmds": 79,
        "sizeofcmds": 8408,
        "flags": [
          "The object file has no undefined references and is executable.",
          "The object file is the input for the dynamic linker and can not be staticly link edited again.",
          "undefined"
        ],
        "reserved": 0
      },
      "loadCommandsInfo": [
        {
          "description": 0,
          "size": 79,
          "offset": " 0x20c008"
        },
        {
          "description": 79,
          "size": 69304453,
          "offset": " 0x20c010"
        },
        {
          "description": 69304453,
          "size": 25,
          "offset": " 0x20c018"
        },
        {
          "description": "64-bits Segment Load Command",
          "size": 1095786335,
          "offset": " 0x20c020"
        },
        {
          "description": 1095786335,
          "size": 20306,
          "offset": " 0x20c028"
        },
        {
          "description": 0,
          "size": 25,
          "offset": " 0x20c060"
        },
        {
          "description": "64-bits Segment Load Command",
          "size": 1163157343,
          "offset": " 0x20c068"
        },
        {
          "description": 0,
          "size": 63488,
          "offset": " 0x20c080"
        },
        {
          "description": 0,
          "size": 63488,
          "offset": " 0x20c090"
        },
        {
          "description": 63488,
          "size": 5,
          "offset": " 0x20c098"
        },
        {
          "description": "UNIX Thread command",
          "size": 21,
          "offset": " 0x20c0a0"
        },
        {
          "description": "Sub Library Load Command",
          "size": 1702125407,
          "offset": " 0x20c0a8"
        },
        {
          "description": 0,
          "size": 1163157343,
          "offset": " 0x20c0b8"
        },
        {
          "description": 0,
          "size": 76152,
          "offset": " 0x20c0c8"
        },
        {
          "description": 76152,
          "size": 623860,
          "offset": " 0x20c0d0"
        },
        {
          "description": 623860,
          "size": 76152,
          "offset": " 0x20c0d8"
        },
        {
          "description": 0,
          "size": 524352,
          "offset": " 0x20c0e8"
        },
        {
          "description": 0,
          "size": 1953718111,
          "offset": " 0x20c0f8"
        },
        {
          "description": 0,
          "size": 1163157343,
          "offset": " 0x20c108"
        },
        {
          "description": 0,
          "size": 700012,
          "offset": " 0x20c118"
        },
        {
          "description": 700012,
          "size": 17556,
          "offset": " 0x20c120"
        },
        {
          "description": 17556,
          "size": 700012,
          "offset": " 0x20c128"
        },
        {
          "description": 0,
          "size": 524360,
          "offset": " 0x20c138"
        }
      ],
      "magic": "cffaedfe",
      "offset": "20c000",
      "processorSubType": "all",
      "processorType": "ARM"
    }
  ]
}

com.autodesk.AutoCADLT2023_StandAlone

v24.2.114.24 Copyright ยฉ 2009-2022 Autodesk, Inc
๐Ÿ”ถ App has not yet been reported to be native to Apple Silicon
๐Ÿ–ฅ Supported Architectures X86
Full Info Plist
{
  "ATSApplicationFontsPath": "Fonts/ttf",
  "BuildMachineOSBuild": "20D91",
  "CFBundleDevelopmentRegion": "en",
  "CFBundleDocumentTypes": [
    {
      "CFBundleTypeExtensions": [
        "dst"
      ],
      "CFBundleTypeIconFile": "dst.icns",
      "CFBundleTypeName": "AutoCAD Project",
      "CFBundleTypeOSTypes": [
        "dst"
      ],
      "CFBundleTypeRole": "Editor",
      "NSDocumentClass": "AcDocument"
    },
    {
      "CFBundleTypeExtensions": [
        "dxf"
      ],
      "CFBundleTypeIconFile": "dxf.icns",
      "CFBundleTypeName": "AutoCAD DXF",
      "CFBundleTypeOSTypes": [
        "dxf"
      ],
      "CFBundleTypeRole": "Editor",
      "NSDocumentClass": "AcDocument"
    },
    {
      "CFBundleTypeExtensions": [
        "dwg"
      ],
      "CFBundleTypeIconFile": "dwg.icns",
      "CFBundleTypeName": "AutoCAD DWG",
      "CFBundleTypeOSTypes": [
        "dwg"
      ],
      "CFBundleTypeRole": "Editor",
      "NSDocumentClass": "AcDocument"
    },
    {
      "CFBundleTypeExtensions": [
        "dwt"
      ],
      "CFBundleTypeIconFile": "dwt.icns",
      "CFBundleTypeName": "AutoCAD Template",
      "CFBundleTypeOSTypes": [
        "dwt"
      ],
      "CFBundleTypeRole": "Editor",
      "NSDocumentClass": "AcDocument"
    },
    {
      "CFBundleTypeExtensions": [
        "lsp"
      ],
      "CFBundleTypeIconFile": "lsp.icns",
      "CFBundleTypeName": "AutoLISP Application Extension",
      "CFBundleTypeOSTypes": [
        "lsp"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "lin"
      ],
      "CFBundleTypeIconFile": "lin.icns",
      "CFBundleTypeName": "AutoCAD Linetype Definition",
      "CFBundleTypeOSTypes": [
        "lin"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "pat"
      ],
      "CFBundleTypeIconFile": "pat.icns",
      "CFBundleTypeName": "AutoCAD Hatch Pattern Definition",
      "CFBundleTypeOSTypes": [
        "pat"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "psf"
      ],
      "CFBundleTypeIconFile": "psf.icns",
      "CFBundleTypeName": "AutoCAD PostScript Patterns",
      "CFBundleTypeOSTypes": [
        "psf"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "dct"
      ],
      "CFBundleTypeIconFile": "dct.icns",
      "CFBundleTypeName": "AutoCAD Dictionary",
      "CFBundleTypeOSTypes": [
        "dct"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "shx"
      ],
      "CFBundleTypeIconFile": "shx.icns",
      "CFBundleTypeName": "AutoCAD Compiled Shape",
      "CFBundleTypeOSTypes": [
        "shx"
      ],
      "CFBundleTypeRole": "None",
      "LSHandlerRank": "Default",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "shp"
      ],
      "CFBundleTypeIconFile": "shp.icns",
      "CFBundleTypeName": "AutoCAD Shape Source",
      "CFBundleTypeOSTypes": [
        "shp"
      ],
      "CFBundleTypeRole": "None",
      "LSHandlerRank": "Default",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "unt"
      ],
      "CFBundleTypeIconFile": "unt.icns",
      "CFBundleTypeName": "AutoCAD Unit Definition",
      "CFBundleTypeOSTypes": [
        "unt"
      ],
      "CFBundleTypeRole": "None",
      "LSHandlerRank": "Default",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "pss"
      ],
      "CFBundleTypeIconFile": "pss.icns",
      "CFBundleTypeName": "AutoCAD Plot Stamp Settings",
      "CFBundleTypeOSTypes": [
        "pss"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "dcl"
      ],
      "CFBundleTypeIconFile": "dcl.icns",
      "CFBundleTypeName": "AutoCAD Dialog Definition",
      "CFBundleTypeOSTypes": [
        "dcl"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "fdc"
      ],
      "CFBundleTypeIconFile": "fdc.icns",
      "CFBundleTypeName": "AutoCAD Field Catalog",
      "CFBundleTypeOSTypes": [
        "fdc"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "pgp"
      ],
      "CFBundleTypeIconFile": "pgp.icns",
      "CFBundleTypeName": "AutoCAD Program Parameters",
      "CFBundleTypeOSTypes": [
        "pgp"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "mln"
      ],
      "CFBundleTypeIconFile": "mln.icns",
      "CFBundleTypeName": "AutoCAD Multiline Definition",
      "CFBundleTypeOSTypes": [
        "mln"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "fmp"
      ],
      "CFBundleTypeIconFile": "fmp.icns",
      "CFBundleTypeName": "AutoCAD Font Map",
      "CFBundleTypeOSTypes": [
        "fmp"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "map"
      ],
      "CFBundleTypeIconFile": "map.icns",
      "CFBundleTypeName": "AutoCAD Font Mapping Table",
      "CFBundleTypeOSTypes": [
        "map"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "cdc"
      ],
      "CFBundleTypeIconFile": "cdc.icns",
      "CFBundleTypeName": "DesignCenter Preview Cache File",
      "CFBundleTypeOSTypes": [
        "cdc"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "cuix"
      ],
      "CFBundleTypeIconFile": "cuix.icns",
      "CFBundleTypeName": "AutoCAD customization file",
      "CFBundleTypeOSTypes": [
        "cuix"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "cui"
      ],
      "CFBundleTypeIconFile": "cui.icns",
      "CFBundleTypeName": "AutoCAD customization file",
      "CFBundleTypeOSTypes": [
        "cui"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "arx"
      ],
      "CFBundleTypeIconFile": "arx.icns",
      "CFBundleTypeName": "AutoCAD runtime extension",
      "CFBundleTypeOSTypes": [
        "arx"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    },
    {
      "CFBundleTypeExtensions": [
        "pc3"
      ],
      "CFBundleTypeIconFile": "pc3.icns",
      "CFBundleTypeName": "AutoCAD Plotter Configuration File",
      "CFBundleTypeOSTypes": [
        "pc3"
      ],
      "CFBundleTypeRole": "None",
      "NSDocumentClass": "None"
    }
  ],
  "CFBundleExecutable": "AutoCAD LT 2023",
  "CFBundleIconFile": "acadlogo.icns",
  "CFBundleIdentifier": "com.autodesk.AutoCADLT2023_StandAlone",
  "CFBundleInfoDictionaryVersion": "6.0",
  "CFBundleName": "AutoCAD LT 2023",
  "CFBundlePackageType": "APPL",
  "CFBundleShortVersionString": "24.2.114.24 Copyright ยฉ 2009-2022 Autodesk, Inc",
  "CFBundleSignature": "????",
  "CFBundleSupportedPlatforms": [
    "MacOSX"
  ],
  "CFBundleVersion": "24.2.114.24",
  "DTCompiler": "com.apple.compilers.llvm.clang.1_0",
  "DTPlatformBuild": "12D4e",
  "DTPlatformName": "macosx",
  "DTPlatformVersion": "11.1",
  "DTSDKBuild": "20C63",
  "DTSDKName": "macosx11.1",
  "DTXcode": "1240",
  "DTXcodeBuild": "12D4e",
  "LSApplicationCategoryType": "public.app-category.business",
  "LSHasLocalizedDisplayName": true,
  "LSMinimumSystemVersion": "10.15",
  "NSAppTransportSecurity": {
    "NSAllowsArbitraryLoads": true
  },
  "NSDesktopFolderUsageDescription": "",
  "NSDocumentsFolderUsageDescription": "AutoCAD LT for Mac needs to create folders within your Documents folder. The folders are used for autosave, crash save, and more.",
  "NSDownloadsFolderUsageDescription": "",
  "NSHumanReadableCopyright": "Copyright ยฉ 2009-2022 Autodesk, Inc",
  "NSMainNibFile": "MainMenu",
  "NSNetworkVolumesUsageDescription": "",
  "NSPrincipalClass": "AcApplication",
  "NSRemovableVolumesUsageDescription": "",
  "NSRequiresAquaSystemAppearance": true,
  "NSUserNotificationAlertStyle": "alert",
  "UTExportedTypeDeclarations": [
    {
      "UTTypeConformsTo": "public.data",
      "UTTypeDescription": "AutoCAD Drawing",
      "UTTypeIdentifier": "com.autodesk.autocad.dwg",
      "UTTypeTagSpecification": {
        "com.apple.ostype": [
          "DWG"
        ],
        "public.filename-extension": "dwg",
        "public.mime-type": "application/dwg"
      }
    },
    {
      "UTTypeConformsTo": "public.data",
      "UTTypeDescription": "AutoCAD Drawing Template",
      "UTTypeIdentifier": "com.autodesk.autocad.dwt",
      "UTTypeTagSpecification": {
        "com.apple.ostype": [
          "DWT"
        ],
        "public.filename-extension": "dwt",
        "public.mime-type": "application/dwt"
      }
    },
    {
      "UTTypeConformsTo": [
        "com.apple.package"
      ],
      "UTTypeDescription": "AutoCAD crx file",
      "UTTypeIdentifier": "com.autodesk.autocad.crx",
      "UTTypeTagSpecification": {
        "com.apple.ostype": "CRX",
        "public.filename-extension": "crx",
        "public.mime-type": "application/crx"
      }
    },
    {
      "UTTypeConformsTo": [
        "com.apple.package"
      ],
      "UTTypeDescription": "AutoCAD DBX file",
      "UTTypeIdentifier": "com.autodesk.autocad.dbx",
      "UTTypeTagSpecification": {
        "com.apple.ostype": [
          "DBX"
        ],
        "public.filename-extension": "dbx",
        "public.mime-type": "application/dbx"
      }
    }
  ],
  "company": "autodesk"
}
Full Meta Details
{
  "fileSize": 1.7488250732421875,
  "architectures": [
    {
      "bits": "64-bit",
      "fileType": "Demand Paged Executable File",
      "header": {
        "magic": 3489328638,
        "cputype": 7,
        "cpusubtype": 3,
        "filetype": 2,
        "ncmds": 76,
        "sizeofcmds": 504,
        "flags": [
          "The object file has no undefined references and is executable.",
          "The object file is the input for the dynamic linker and can not be staticly link edited again.",
          "undefined"
        ],
        "reserved": 0
      },
      "loadCommandsInfo": [
        {
          "description": 4277009103,
          "size": 3,
          "offset": " 0x0"
        },
        {
          "description": "Symbol segment command",
          "size": 76,
          "offset": " 0x8"
        },
        {
          "description": 76,
          "size": 69304453,
          "offset": " 0x10"
        },
        {
          "description": 69304453,
          "size": 25,
          "offset": " 0x18"
        },
        {
          "description": "64-bits Segment Load Command",
          "size": 1095786335,
          "offset": " 0x20"
        },
        {
          "description": 1095786335,
          "size": 20306,
          "offset": " 0x28"
        },
        {
          "description": 0,
          "size": 25,
          "offset": " 0x60"
        },
        {
          "description": "64-bits Segment Load Command",
          "size": 1163157343,
          "offset": " 0x68"
        },
        {
          "description": 0,
          "size": 3328,
          "offset": " 0x80"
        },
        {
          "description": 0,
          "size": 3328,
          "offset": " 0x90"
        },
        {
          "description": 3328,
          "size": 5,
          "offset": " 0x98"
        },
        {
          "description": "UNIX Thread command",
          "size": 19,
          "offset": " 0xa0"
        },
        {
          "description": "Sub Umbrella Load Command",
          "size": 1702125407,
          "offset": " 0xa8"
        },
        {
          "description": 0,
          "size": 1163157343,
          "offset": " 0xb8"
        },
        {
          "description": 0,
          "size": 5936,
          "offset": " 0xc8"
        },
        {
          "description": 5936,
          "size": 544752,
          "offset": " 0xd0"
        },
        {
          "description": 544752,
          "size": 5936,
          "offset": " 0xd8"
        },
        {
          "description": 0,
          "size": 524352,
          "offset": " 0xe8"
        },
        {
          "description": 0,
          "size": 1953718111,
          "offset": " 0xf8"
        },
        {
          "description": 0,
          "size": 1163157343,
          "offset": " 0x108"
        },
        {
          "description": 0,
          "size": 612128,
          "offset": " 0x118"
        },
        {
          "description": 612128,
          "size": 7830,
          "offset": " 0x120"
        },
        {
          "description": 7830,
          "size": 612128,
          "offset": " 0x128"
        }
      ],
      "magic": "cffaedfe",
      "offset": "0",
      "processorSubType": 3,
      "processorType": "X86"
    }
  ]
}